Features cable tester CT-04 C:

• The mobil versatile cable tester enables quick and convenient continuity cable testing for different types of cables.
• 9-way switch with LED display to test plug connection and current flow of cables for each several conductor
• Power supply: 9 V battery and battery check with LED display at the 9-way switch
• Testing of cables with different plugs (e.g. XLR to jack)
• GND (ground) glows, if there is a connection with the corresponding contacts and the chassis
• Testing of cables with bananen plugs, sensors or cables without plugs by LED display and bleep
• Material: robust metal chassis
• Dimensions: 190 x 110 x 50 mm
• Weight: 783 g (without battery)
• Unit frontside with short manual and pin configuration for jack, Speakon and Phono, bilingual (german/english) manual and original packing with english manual 

Following plug testable:

• 3.5 and 6.3 mm jack, Mono (TS) and Stereo (TRS) jack
• 3-pin and 5-pin XLR cable (XLR-M to XLR-F)
• Phono/RCA plug (Chinch)
• 4-pin and 8-pin Speakon plug
• 4-pin S Type socket
• 3-pin, 5-pin, 7-pin and 8-pin DIN plug
• RJ 45 cable
• Banana plug
• Cables without plugs

Configuration:

6.3 mm mono (¼" TS) jack to 6.3 mm mono  (¼" TS) jack:
1 sleeve to 1 sleeve, 3 ring 
2 tip to 2 tip
3 ring to 1 sleeve, 3 ring (shorted with sleeve)

6.3 mm stereo (¼" TRS) jack to 6.3 mm sereo (¼" TRS)  jack:
1 sleeve to 1 sleeve
2 tip to 2 tip
3 ring to 3 ring

XLR balanced to XLR balanced:
pin 1 to pin 1
pin 2 to pin 2
pin 3 to pin 3

XLR unbalanced to XLR unbalanced:
pin 1 to pin 1, pin 3
pin 2 to pin 2
pin 3 to pin 1, pin 3

6.3 mm mono (¼" TS) jack to XLR unbalanced:
1 sleeve to pin 1, pin 3
2 tip to pin 2
3 ring to pin 1, pin 3 (shorted with sleeve)

6.3 mm stereo (¼" TRS) jack to XLR balanced:
1 sleeve to pin 1
2 tip to pin 2
3 ring to pin 3

Manual cable tester CT-04 as PDF